If your contactless use case involves attaching NFC Tags to a metal surface then an On Metal NFC Tag will be required. An On Metal NFC Tag is designed to protect the antenna due to its susceptibility to interference from metals in close proximity. This interference will corrupt the signal, rendering your Tag less reliable or even unusable. On Metal NFC Tags solve this problem by incorporating a shielding layer to protect the chips contactless signal.
Happily, you can also use On Metal NFC Tags on any other kind of surface too. So even if only some of your surfaces are metal, you can still benefit from bulk ordering benefits.
To have a logo or specific design printed on your On Metal NFC Tags please select 'Full Colour Print' in the drop down above. We can print anything you desire, whether that be your logo, messages, photos or marketing designs. This is an ideal way to ensure that your branding and messages are consistent, to highlight your company and to encourage the engagement with your customers or workforce like never before.
- Memory Capacity: NTAG213: 144 Bytes / NTAG216: 888 Bytes
- Material: PET / Polypropylene
- Adhesive: Permanent Adhesive
- Metal Friendly: Yes
- Water Rating: Water Resistant
- Interface Specification: ISO 14443A / 13.56 MHz
- Operational Temperature: -25 to 70°C
- Bending Diameter: 50mm
Please note: If the Tag size or shape you require is not listed above please contact us and we will see what can be acheived. Please bare in mind when enquiring for custom sized Tags that the MOQ is 10,000 units for sizes up to 100x100mm and 20,000 units for sizes over 100x100mm. If you think our NFC Labels may be a better option for your use case please go to our NFC Labels page here where we can produce our NFC Labels from 105x74mm onwards.